Beryllium V3
$249.00$169.00 USD
Description
Applied Material Properties: Be
Beryllium is among the least dense stable metals, but also has among the highest Young’s modulus values (a ratio of the stiffness) and speed of sound.
This results in high efficiency and extremely low distortion as the diaphragm does not bend on its own, moves homogeneously, and dissipates internal energy very well.
This rare combination of performance attributes is what endows the Be IEM’s with their freakish ability to compete with the best Beryllium transducer-based headphones on the market, at any price.
Still not sure that this IEM is for you? Then use our amazing Select-A-Tron to guide your IEM choice!
Is there a measurement that demonstrates clarity?
Yes! A “waterfall plot” is one of the measurements our team performs when designing transducers, and acoustic systems in general.
Listening to a system that has a poor waterfall plot measurement is like wearing the wrong prescription glasses. Everything is out of focus.
Conversely, a system with a fantastic waterfall plot measurement is like 20/20 vision for your ears. Tremendous clarity.
Our proprietary 10mm Beryllium transducer has insane waterfall plot measurements:
How does a good waterfall plot improve the overall sound experience?
A favorable waterfall plot has a direct correlation with the perception of how ‘real’ something sounds, and the systems ability to accurately render the depth and breadth of a recording.
Mechanical Elements
Transducer Diaphragm: Beryllium
Transducer Surround: Bonded PEEK
Transducer Basket: Aluminum
Transducer Magnet: N48H Grade Neodymium
Enclosure Body: Eastman Tritan™
Protective Grille: 316 Stainless Steel
Bonding Compound: Cyanoacrylate Adhesive
Sealant Compound: Polyvinyl Acetate
Mounting Tips: Medical Grade Silicone and Urethanes
All components are finite element analyzed for stress, strain, and durability.
Included Accessories
Single Flange Tips – Small, Medium, Large
Dual Flange Tips – Small, Medium, Large
Memory Foam Tips – Small, Medium, Large
Protective Travel Case
Gold Plated ¼” TRS Adapter Jack
Gold Plated Dual Mono Airplane Adapter
Specifications
| Performance | |
|---|---|
| Frequency Response | 12 Hz to 45 kHz |
| Impedance | 32 Ohms nominal |
| Sensitivity | 100 dB SPL at 1mW in ear |
| Power Handling | 200 mW continuous |
| Peak SPL | 123 dB |
| THD | Less than 1% THD at 1mW |
| Physical Properties | |
|---|---|
| Cable Length | 1.5 m |
| Mass | 2.8 / 9.3 g (IEM/Set) |
| Operational Temperature | -20 to +50° C |
| Operational Humidity | 0-95% Relative Humidity |
| NRR | 31.3 dB (foam eartrip) |
| Overall Length | 21 mm |
| Body Diameter | 12 mm |
| Nozzle Diameter | 6 mm |
| Material Properties | |
|---|---|
| Melting Point | 1560 Kelvin |
| Speed of Sound | 12890 meters per second |
| Young’s Modulus | 287 Gigapascals |
| Brinell Hardness | 1320 Megapascals |
Tritan™ is a trademark of Eastman Chemicals
Additional information
| Weight | 1 kg |
|---|
Description
Let It Be
Be (Beryllium) is our highest-awarded IEM. It is known as the master-of-all-music, failure-at-none. Our other IEMs may do better in some genres but for all-around excellence, Be is where most end their search. Revealing enough to be a true reference IEM but forgiving enough to use on any source.
Beryllium is among the lowest density stable metals but also has among the highest Young’s modulus values (a ratio of the stiffness) and a very high internal speed of sound.
This results in high efficiency and extremely low distortion as the diaphragm does not bend on its own, moves homogeneously, and dissipates internal energy very well.
This rare combination of performance attributes is what endows the Be IEMs with their freakish ability to compete with the best Beryllium transducer-based headphones on the market, at any price.
Still not sure that this IEM is for you? Then use our amazing Select-A-Tron to guide your IEM choice!
Nerd Layer
I See a Detachable Cable? What’s That About?
We have also developed our own 2.5mm jack: the IDEEL connector. This connector is the world’s smallest 2.5mm jack, measuring just 3.6mm across, and a tiny 9.5mm mounting depth. This jack allows us to use the very robust 2.5mm TS plug in our tiny IEMs. No more delicate MMCX or difficult 2 pin plastic connectors needed.
Mechanical Elements
Transducer Diaphragm: Beryllium
Transducer Surround: Bonded PEEK
Transducer Frame: 316 Stainless Steel
Transducer Magnet: N48H Grade Neodymium
Enclosure Body: Tritan™ copolyester
Protective Grille: 316 Stainless Steel
Bonding Compound: Cyanoacrylate Adhesive
Sealant Compound: Polyvinyl Acetate
Mounting Tips: Medical Grade Silicone and Urethanes
Connector: IDEEL 2.5mm TS compatible connector (tip hot, sleeve ground)
All components are Finite Element Analyzed for stress, strain, and durability.
Tritan™ is a trademark of Eastman Chemicals
Performance Specifications
Frequency Response: 12 Hz to 45 kHz
Impedance: 32 Ohms nominal
Sensitivity: 100 dB SPL at 1mW in ear
Power Handling: 200 mW continuous
Peak SPL: 123 dB
THD: Less than 1% THD at 1mW
Included Components
Included Components
- Be IEMs
- 1.2 meter long cable single 3.5mm TRS to dual 2.5mm TS jack and metal shells
- Carrying Case
- Single Flange Tips – Small, Medium, Large
- Dual Flange Tips – Small, Medium, Large
- Memory Foam Tips – Small, Medium, Large
- Protective Travel Case
- Gold Plated ¼” TRS Adapter Jack
- Gold Plated Dual Mono Airplane Adapter
Physical Specifications
Cable Length: 1.2 m
Mass: 2.8 / 16.7 g (IEM/Set)
Operational Temperature: -20 to +50° C
Operational Humidity: 0-95% Relative Humidity
NRR: 31.3 dB (foam eartrip)
Overall Length: 21 mm
Body Diameter: 12 mm
Nozzle Diameter: 6 mm
Buy Beryllium V3 For only $169.00 USD
Related products
-
Sale!
Titanium V3
$129.00 USDSelect options This product has multiple variants. The options may be chosen on the product page -
Sale!
Silver IDEEL Connector Cable
$49.00 USDSelect options This product has multiple variants. The options may be chosen on the product page -
Sale!
Magnesium V3
$99.00 USDSelect options This product has multiple variants. The options may be chosen on the product page -
Sale!
Neon Dual Source BT Receiver
$89.00$49.00 USDSelect options This product has multiple variants. The options may be chosen on the product page
Brian R. –
One word – stunning. Be is really natural sounding and never tiring or harsh. It just sounds right. Plenty of bottom end almost you can feel it like a great speaker setup but it’s not overblown and doesn’t overwhelm the midbass or midrange. No hint of distortion or noise. They seem clearer than the old V1s I had, I guess that’s the new plastic used. And I love the new connectors! It’s so easy and solid to connect and has lasted 8 months so far normally i get about 3 months from a set of mmcx connectors on a cable before they start failing and pulling off. Not these rock solid. Definitely worth the money I spent I use them every day.
Theo –
I get why people rave about these. They come in a low-end package with sleeve and cardboard. Cool carry tin but weird color gold dunno why but it is. IEMs look really normal plain nothing special like so many. When I put them in they are ultra comfort for all day wear never hurt my ears. I guess old style design is still best lol. Sound is amazing. I have an LG V50 and these BE sound so good on that phone. Like I am in a room with a big stereo system but just on my self you know? Hard to describe but it just sound real and tight. Love them!
Walter –
You’ve been listening to music with cotton balls in your ears until you’ve tried these IEMs!
The clarity and balance achieved from Beryllium V3s is astounding. I didn’t think Periodic Audio could surpass their original IEMs, but they have. If you’ve ever wanted to hear the hair growing on a conductor’s knuckles (I’m looking at you, Hans Zimmer!), now’s your chance!
Shawn –
OK, SICK. Got some of these last month and MAD bad sound. Just kick everything. Tight quick bass, clean mid, lots of treb without cuttin heads off. Pricy yeah but way better than my airpods. I use the pods now for calls and stuff but when I want to listen to music the Bes are the only way to go!
Johnny On The Spot –
VERY good audio from these! I have some more expensive units from Empire and Campfire, but I keep coming back to the Berylliums. They’re just more comfortable, really don’t give up any audio quality (even if they are balanced a bit different but so are the Empire and Campfire units) and easy to drive with my small Fiio player. I recently got the Neutron adapters too and they are great I can use the MMCX cables I have to get different experiences and change up the way the set wears and looks. Great overall value for just $249!